← Help and Support

Field Ready

Field Ready Field Guide

Field Ready walks a technician through a preseason inspection of a machine and its precision technology on an iPhone or iPad, then turns it into a signed PDF report for the customer. This guide covers every screen of the app for technicians, store admins, owners, and customer logins. The staff website has its own guide.

Updated November 20, 2026

At a glance

Every inspection ends as a signed report the customer can see Choose machineor add a new one Choose inspectionone of four kinds Build checklistchecks that apply Record checkssaved as a draft Read the previewthe report, as DRAFT Finalize and signfix anything listed Report savedlocked for good Customer sees itafter the next sync tap Review and Finalize

Until it's finalized, a draft syncs to everyone at its store, can be picked up on another phone, and can be deleted by an admin or owner. Once finalized, it and its report are permanent.

Getting started

Your dealer creates every login; there is no sign-up in the app. When they add you, you get an email from Field Ready with a Choose Your Password button.

  1. Open the email on your iPhone or iPad and tap Choose Your Password. If you have the Field Ready app, it opens straight away.
  2. If a Field Ready web page opens instead, you don't have the app yet: get it, then tap the button in the email again. (Have the app and the page still opens? Press and hold the button in the email and choose Open in “Field Ready”.)
  3. The app signs you in and asks you to choose your password: at least 10 characters, typed twice. Nothing else opens until you do.
  4. Field Ready opens on Home. It remembers you, so after the first sign-in it opens even with no signal.

On a computer, or a phone without the app, you can choose your password on that page instead, then sign in to the app with your email and that password. The link works once, for 4 hours; if it has expired, ask your store to send a new one. If you were given a temporary password instead of a link, sign in with it and choose your own when the app asks.

If you see No access yet, your email can sign in but hasn't been given access. Ask a Field Ready owner to invite that email, then sign in again. If you forget your password, an owner or admin can email you a new link from the staff website.

Two-step sign-in

If your login has two-step sign-in turned on (you set it up on the staff website's Account page), the app asks for the 6-digit code from your authenticator app after your password. Nothing opens until you enter it. If you turn it on while the app is signed in, the app asks for the code the next time you open it; anything you changed meanwhile waits on the phone and syncs once you enter it. Lost your authenticator? Ask an owner to reset your two-step sign-in.

A phone someone else used

A phone keeps one person's records. If someone else used it before you, the app shows Someone else's records before anything opens. Erase and Continue removes their records from this phone (never from the server) and signs you in; Sign Out leaves them. If it says changes haven't reached the server, sign out and let that person sign in and sync first, or those changes are lost. When an owner turns off someone's access, the app removes their records from the phone the next time it checks, unless some haven't synced.

What each role sees and can do

RoleSeesCan do
Employee (technician)Every customer, machine, and inspection at their storeAdd and edit customers and machines, run and finalize inspections, record subscriptions, delete their own Custom drafts
AdminThe same, for their storeAlso archive and delete customers and machines, and delete drafts at their store
OwnerEvery storeEverything, at every store
Customer loginTheir own farm's machines, finished inspections and reports, subscriptions, and store contactsAdd and update their own machines, technology, and subscriptions

Staff see five tabs along the bottom: Home, Inspections, Equipment, Subscriptions, and Settings. Customers see the same five, set up for their farm (see For customers).

A new install starts with sample customers, machines, and inspections so you can try every screen. They never sync, and you can remove them in Settings.

The Home screen

Home is where a technician starts the day: new inspections, drafts to pick up, and what needs attention, top to bottom. It shows the same numbers as the website's Dashboard, counted from what's on your phone, so it works with no signal. Your organization's name is at the top.

A banner near the top says when sample data is loaded. Remove it in Settings › Sample data once you're working with real customers.

Customers and machines

Every inspection is of one machine, and every machine belongs to a customer and a store. The Equipment tab lists customers with their machines underneath; search by customer, machine, or serial number.

Add a machine

  1. In Equipment, tap Add Machine (or Add a new machine while starting an inspection).
  2. Farm: pick the customer, or choose New customer and enter the name, plus phone and email if you have them.
  3. Machine: choose the Equipment type first. It decides the questions, the technology questions, and which inspections fit. Then fill in the manufacturer, model, model year, serial number, and where it's kept (yard, shed).
  4. About this machine: answer the type's questions, such as a tractor's drive. Checklists include or skip checks from these answers, so leave any you can't confirm as Not answered; every check then stays in.
  5. Store: choose the store the machine belongs to. Everyone at that store can see it and its inspection history.
  6. Tap Save.

Leave anything you can't confirm blank. It shows as Unknown, which is always better than a guess.

Equipment types

The built-in types are Tractor, Planter, Combine, Self-propelled sprayer, Floater / applicator, Windrower, Forage harvester, Grain drill, Baler, Mower conditioner, Rake / tedder, Tillage, Telehandler / loader, and Truck. Owners can add more on the website. A truck's questions are its Truck type (semi tractor, straight truck, or pickup), its Brakes (air or hydraulic), and whether it has a Dump hoist. Types that can carry guidance get the technology questions and Guidance inspections; planters get Precision Planting products and Planter inspections.

A machine's page

Tap a machine to open its page. From top to bottom:

Technology

On a machine's page, open the technology to describe its precision setup. Choose Unknown rather than guessing: unknown answers keep the related checks in the inspection.

SettingWhat to choose
Guidance systemPTx, Fendt Guide, MF Guide, John Deere, Raven, Ag Leader, or Other
Guidance softwareThe steering product, from those for the chosen system (for example EZ-Pilot Pro, GREEN FIT, RS1, SteerCommand Z2). Factory systems (Fendt Guide, MF Guide) have it built in
SteeringManual guidance only; Assisted steering (wheel or motor kit); Full Hydraulic Install; Full CAN Install. Factory systems are set to factory-integrated steering
Correction sourceNo paid correction; Satellite-delivered; Network RTK (cellular); Local RTK base (radio); Other

Changing the guidance system clears guidance software that belongs to another system.

Components: tap Add component for each display, GNSS receiver, antenna, steering kit, steering controller, and modem or radio. Record the model, serial number, and software or firmware version, plus the correction level on a receiver (Basic, Intermediate, High). How sure are you? marks whether you verified it on the machine.

Moving a receiver: on aftermarket guidance (PTx, Raven, John Deere, Ag Leader, and others that aren't factory-integrated), a GNSS receiver's page lists the Subscriptions that belong to it. When the customer moves the receiver to another tractor, tap Move to Another Machine, choose the machine (the customer's other machines that can have guidance, each with its guidance system), and confirm. The receiver goes with its model, serial number, software, correction level, and subscriptions; each machine's correction source stays as it is, so update it if needed. Customers can move their own receivers too. On factory guidance (Fendt Guide, MF Guide) receivers don't move.

Optional features: mark each as Installed, Not installed, or Unknown: implement guidance, automatic end-of-row turns, section control, ISOBUS implement control, rate control, and wireless data transfer. Checks for a feature appear only when it's marked Installed.

Customers

Tap a customer's name in Equipment, or Add Customer, to edit the name, phone, email, and home store. A customer's machines can belong to other stores.

Archive or delete

Admins and owners can archive or delete. Archiving hides a customer or machine from lists and keeps all its history; Show Archived in Equipment brings them back into view, and Unarchive restores them. A machine or customer with a finalized inspection can't be deleted, because finalized inspections are permanent records; archive it instead. Deleting removes the record, its technology, subscriptions, and draft inspections on every device, and can't be undone.

Starting an inspection

An inspection takes three choices: the machine, the kind of inspection, and the visit's details. The app then builds a checklist with only the checks that apply to that machine.

  1. Tap Start New Inspection on Home, New Inspection in the Inspections tab, or Start Inspection on a machine's page (which skips step 2).
  2. Choose Machine: pick the customer's machine, or Add a new machine if it isn't there yet.
  3. Choose Inspection: pick the kind. Each shows how many checks it has for this machine.
  4. Fill in the details: Technician (filled in for you), Season, Type (Field Ready, Follow-up, or Other), and optionally the Work order and Location.
  5. Look over the machine summary at the bottom. It shows the technology or the answers the checklist is built from. If something is wrong, fix it now with Review machine details; you can also change the technology later.
  6. Tap Build Checklist to start. The draft is saved right away.
KindWhat it inspectsOffered for
GuidanceDisplay, receiver, steering, and correctionEvery equipment type that can carry guidance. The form follows the machine's guidance system: Factory Guidance for Fendt Guide and MF Guide, a system's own form (PTx, John Deere, Raven, Ag Leader), or the Other form
PlanterPrecision Planting technologyPlanters
MachineCondition of the machine itselfThe machine's equipment type: each type has its own form, written on the website by owners and the staff they allow. Trucks get the Truck DOT inspection, which follows the federal annual inspection's items (brakes, coupling devices, steering, suspension, tires and wheels, lights, and more) and points to the federal and state standards for the limits
CustomYour dealer's own checklists, made on the websiteEveryone on staff, for the equipment types each is set for. Customers never see them

Set the machine's Guidance system in its technology before you start a Guidance inspection: it decides which form the inspection uses. A draft keeps the form it started with. Only forms published on the website are offered, so a new or changed form reaches phones at their next sync. A Custom inspection works like any other: everyone at the machine's store sees it. Each Custom checklist says whether the customer sees the finished inspection; when it doesn't, the overview says Internal: the customer doesn't see this inspection.

Recording checks

Each check is one screen: read how to do it, do it on the machine, then record what you found. Everything saves on the phone as you go, so you can stop and pick up later.

The inspection overview

Opening an inspection shows its overview: progress ("6 of 25 checks recorded"), the overall readiness so far, and the checks grouped by section with each one's result. It also lists Subscription concerns and checks that Need more information. Tap Next: <check> to go to the next unrecorded check, or tap any check to jump to it. Findings lists failed checks and checks that passed with recommendations; Edit Technology fixes the machine's setup; View Report shows a draft of the PDF.

Under the checks, a line says whether the form has been reviewed: who reviewed it and when (owners mark forms reviewed on the website), or that it hasn't been reviewed yet. Until it has, follow the manufacturer's procedures for calibrations and tests. Custom checklists don't show this line.

One check

A check screen shows, top to bottom:

The five results

ResultUse it whenYou must also record
PassThe test was done and met its standardNothing more
Pass With RecommendationsIt passed, but you recommend something to the customerThe recommendation
FailThe test was done and did not meet its standardSeverity (Critical, Major, Minor, Advisory), what failed in Notes, and the recommended repair. These are reminders: you can finalize without them, but the report is better with them
Not TestedYou didn't do the testThe reason, such as machine unavailable, conditions unsuitable, customer declined, or deferred. Other reason needs a description
Not ApplicableThe check doesn't apply to this machine's setupOptionally, why

Never mark a check you didn't do as Pass or Fail. Not Tested keeps the inspection honest, and the report lists every untested check with its reason.

Photos

Tap Take Photo to use the camera, or Library to add from your photos. A check can have up to 5 photos; to add another after that, remove one. Some checks need a photo, or need one only when they fail; the check says so. Location data is removed from photos when they're saved. Tap a photo to see it full size or delete it.

Subscriptions inside a check

The correction checks show Subscriptions on this machine right on the check. Confirm each one's service and expiration, tap Mark Checked Today once you've verified it, or Add Subscription if one is missing. See Subscriptions for what to record.

What still needs information

A check that's missing something shows it under the result in plain words, such as "Choose why it wasn't tested" or "Write what you recommend." The overview's Needs more information list gathers them all, so nothing is missed before finalizing.

Readiness

Every inspection gets one overall result, decided by fixed rules in this order, never by a score or percentage. The first rule that matches wins.

  1. Not Ready: at least one check failed.
  2. Incomplete: nothing failed, but a required check isn't recorded yet or was Not Tested.
  3. Ready with Recommendations: nothing failed or is missing, and at least one check passed with recommendations.
  4. Ready: every required check passed and nothing failed.

A failure's severity doesn't change the result: one minor failure still makes the machine Not Ready, and the report shows the severity beside it. Optional checks left blank never hold up readiness.

The overview and the report explain the result in a line, such as "Failed: Steering calibration status" or "2 required checks still to record." Subscription concerns, like an expired correction service, appear next to it but don't change it on their own.

Finalizing and the report

Finalizing signs the inspection, saves its PDF report, and locks it for good. Check everything first: a finalized inspection can't be edited.

  1. On the overview, tap Review and Finalize. The Report Preview opens, marked DRAFT, so you can read exactly what the customer will get.
  2. Tap Finalize and Sign.
  3. Fix anything under Fix before finalizing; the button stays off until the list is empty. Items under Failure details not filled in are reminders only.
  4. Check the Overall readiness.
  5. Sign under Technician signature (tap Clear to start over).
  6. Optionally, the customer types their name and signs under Customer acknowledgment.
  7. Add Additional notes if you like; they're printed on the report.
  8. Tap Finalize Inspection, then Finalize and Save Report to confirm.

The report is saved as Version 1 with the time it was saved, and the inspection moves to Completed. Tap Share or Print to email it, AirDrop it, print it, or save it to Files. It also syncs, so the customer sees it in their app and the office has it.

What the report contains

A finalized report is never rewritten. Its checklist line names who reviewed the form and when, or says the form hasn't been reviewed yet. Custom checklists have no review line, and an internal one says internal.

Drafts

An inspection is a draft until it's finalized. Drafts sync like everything else, so another technician at the same store can pick one up on their own phone.

Deleting a draft

Admins and owners can delete drafts at their store, Custom ones included. Open the draft and choose More › Delete Draft, or swipe it in the Inspections list. Its results and photos are deleted on every device, and it can't be undone. Finalized inspections can never be deleted.

Subscriptions

A lapsed correction subscription stops a working system in the field, so Field Ready tracks each machine's subscriptions and flags them before they run out. The Subscriptions tab groups every subscription at your store:

GroupMeans
Expired or expiring within 30 daysAct now: call the customer about renewing
Expiring within 90 daysRenew before the season
CurrentGood for more than 90 days
No expiration dateFind out when it ends
Missing subscriptionsThe machine uses a paid correction (satellite or network RTK) but has no subscription recorded

On aftermarket guidance each subscription also shows its receiver, as "Receiver AG-25 · S/N 1234 · High". One that isn't tied to a receiver yet says Not tied to a receiver: open it and choose one. Deleting a receiver keeps its subscriptions on the machine, untied.

An expiration date alone doesn't prove a subscription is active. Only entries marked Verified with provider were confirmed with the provider.

Adding or editing a subscription

Open a machine and tap Add subscription, or tap an existing one.

  1. Choose the Correction type. On aftermarket guidance, choose the Receiver it belongs to (the machine's only receiver is already chosen), or New receiver with its model and serial number. It can't be saved without one, because the subscription follows the receiver from machine to machine. On factory guidance it goes with the machine.
  2. Pick the service from the list, which is grouped by provider (for example Trimble CenterPoint RTX, John Deere SF-RTK, Raven Slingshot RTK, Ag Leader TerraStar-C PRO). Choose Custom service to type a provider and service name that aren't listed.
  3. Enter the Account or subscription reference if the customer has one. Never enter passwords or login details.
  4. Turn on Has an expiration date and set Expires.
  5. Choose the Source: Customer reported, From customer account or document, Verified with provider, or Not verified.
  6. Mark it Checked today when you've just confirmed it, and add Notes if needed. Tap Save.

Listed services show where their details come from, such as a manual page, and the accuracy only when a manual states it.

Working offline and syncing

Field Ready works fully without a signal: every tap saves on the phone first. Sync sends your changes to the server and brings in everyone else's whenever there's a connection, with nothing for you to do.

Sync runs on its own:

If a sync can't finish, it tries again on its own, waiting a little longer each time (up to 15 minutes).

Settings › Sync

You seeIt means
Synced 2 minutes agoEverything is up to date as of then
Syncing…A sync is running
OfflineNo connection. Changes are safe on the phone and sync when you're back online
Couldn't syncThe server answered with a problem; it retries on its own
Waiting to sync: 3Changes the server doesn't have yet, counted after each sync
2 machines need a storeMachines can't sync until they belong to a store: tap Choose a Store, pick one, then Assign
1 item couldn't syncThe server refused something; the list says what and why

Tap Sync Now to sync right away. Sample data never syncs.

When two people change the same thing

If a record was changed on your phone and somewhere else before syncing, your phone's version is kept and sent. The one exception: an inspection already finalized on the server always wins, so a finalized report is never overwritten. If you delete something the server keeps, such as a machine with a finalized inspection, it's put back on your phone with a note, and you can archive it instead.

Each phone downloads only what its person can see. If a phone's records belong to a different organization, sync stays off and Settings says so; contact your Field Ready owner.

Settings

The Settings tab holds your account, sync, notifications, report branding, and sample data.

Notifications

Field Ready can notify your phone when:

Each has a switch under Settings › Notifications. (Customer logins get only notifications about new offers, once they turn them on: see Offers from your dealer.)

You areWhat's on until you change it
An adminBoth inspection notifications, for your store
An employeeNone; turn on what you want, for your store
An ownerInterested customers, from every store
A customer lead managerInterested customers, for your store

Only owners and customer lead managers (an owner ticks Customer lead manager for them on the website) are told about interested customers, or see that switch. Owners can also choose Stores there. You never get a notification about something you did yourself.

Admins, owners, and customer lead managers see a card on Home the first time: tap Turn On and your iPhone asks for permission. Everyone else is asked when they first turn on a switch. If notifications are off for Field Ready, Settings › Notifications shows a button to the iPhone's Settings.

Tap a notification to open that inspection or machine. An inspection finished with no signal notifies people when that phone syncs. Signing out stops notifications on your phone.

A red number on the Field Ready icon counts the notifications since you last opened the app, and opening the app clears it. To turn the number off, go to Settings › Notifications › Field Ready in the iPhone's own Settings app and turn off Badges.

For customers

A customer login shows one farm's equipment, finished inspections, and subscriptions, lets the customer keep their machine list up to date, and lets them inspect their own machines with the dealer's checklists. It never shows other farms, staff drafts, or staff screens.

TabWhat's there
HomeA welcome; four numbers (Machines, Due for inspection, Not ready, Subscriptions to renew) that open the matching tab; Offers from the dealer; Your machines, each with where it stands (Not Ready, Due for Inspection, or its last result) and when it was last inspected, those needing attention first; the latest inspection with View report; and Who to contact at their store
EquipmentTheir machines, with Add Machine
InspectionsIn progress: inspections they started themselves. Below: every finished inspection and its PDF report. The search box finds them by machine, form, date, or result (such as "fendt 2026" or "not ready")
SubscriptionsTheir correction subscriptions; expired or expiring ones are flagged with a reminder to renew before the season
SettingsAccount, Change Password, Show offers, Notify me about new offers, privacy links, Delete Account, Sign Out

What customers can change

Every machine a customer adds or changes shows Changed by the customer to staff, in the app and on the website. Staff check it and tap Mark as Checked, or edit the machine, to clear it.

The contacts under Who to contact are set by the dealer on the website, so customers always reach the right people at their store. Their headings use the dealer's own names for each role (for example, Parts Counter instead of Customer Service Representative). After I'm Interested, the app names the person who'll be in touch: someone in the department the offer is for (Sales, Parts, Service, or Technology).

Doing an inspection yourself

Customers can inspect the machines on their own farm with the same checklists the dealer's technicians use, unless the dealer has switched this off.

  1. Open the machine in Equipment and tap Start Inspection.
  2. Choose the inspection (Guidance, Planter, Machine, or Field Ready, whichever fit the machine), check the details, and tap Build Checklist.
  3. Go through the checks as described in Recording checks: results, notes, photos.
  4. Tap Finalize, sign under Your signature, and finish. The report is saved and sent to the dealer.

Until it's finalized, the inspection is yours alone: it's under In progress on the Inspections tab and on the machine, and nobody else sees it, not even the dealer or another login for your farm. You can delete it while it's in progress. Once finalized, the dealer sees it and its report, marked Done by the customer.

Offers from your dealer

Your dealer may have offers that fit your machines, such as a discount on renewing a correction subscription or on a feature your planter doesn't have yet. They appear on Home and on the machine they're for, until they end.

Notifications about new offers are off until you turn them on. The first time, Home asks Hear about new offers?: tap Turn On (your iPhone then asks to allow notifications) or Not Now. With them on, your phone tells you when an offer for your equipment starts, and tapping it opens Home. Settings › Notify me about new offers turns them off or back on. If notifications are off for Field Ready in the iPhone's Settings app, turn them on there first.

Your dealer may also email offers to the email address on your farm's record. Each email says which dealer it's from and has a Stop offer emails link at the bottom; tap it, then Stop Offer Emails.

Offers need signal to load; the last ones stay on your phone until they end. They never appear in inspection reports.

The website for customers

Adding machines is easier on a computer. Customers sign in to the staff website (fieldready.agri-barn.com) with the same email and password. It opens on their Dashboard: each machine with when it was last inspected, its latest result, and a timeline of its inspections; every finished inspection with what it found and its report to download; and a tracker of their subscriptions by renewal date. My equipment lists their farm's machines, with Add Machine. Open a machine to change its details, answers, technology, components, features, and subscriptions, or to archive it (or delete it if no inspection has been done). Changes reach the app at its next sync, and the dealer sees them marked Changed by the customer. The Account page there turns two-step sign-in on or off.

Troubleshooting and common questions

ProblemWhat to do
A customer's inspection appeared, marked "Done by the customer"The customer did it on their own machine and finalized it. Read it like any report; the customer signed it
Can't sign inCheck the email address. If you forgot your password, ask an owner or admin to send you a password link from the website
The link says it expired or was already usedEach link works once. Ask your store to send a new one
The link says someone is signed in on this phoneSign out first (Settings › Sign Out), then tap the link in the email again
The app asks for a 6-digit codeTwo-step sign-in is on for your login: open your authenticator app. Lost it? Ask an owner to reset your two-step sign-in
The app says the phone has someone else's recordsSee A phone someone else used in Getting started
"No access yet" after signing inYour email isn't invited yet. Ask a Field Ready owner to invite it, then sign in again
A customer or machine is missingTap Sync Now in Settings. You only see your own store's records; turn on Show Archived in Equipment for archived ones
A new checklist isn't offeredIt has to be published on the website, and the phone has to sync. Guidance inspections are offered only for types that can carry guidance, and Planter only for planters. A Guidance inspection uses the form for the machine's guidance system, so check the system in its technology
A check I expected isn't in the inspectionThe checklist follows the machine's technology and answers. A feature must be marked Installed; Manual guidance only leaves out the steering checks. Set anything you're unsure of to Unknown and reopen the draft
Finalize Inspection is greyed outFix each item under Fix before finalizing and sign. Missing failure details don't block it
The report shows the wrong company nameChange Settings › Report Branding on that phone. Reports already finalized keep what they were saved with
My changes aren't on another phone or the websiteCheck Settings › Sync: Offline means they're waiting on this phone. Tap Sync Now once you're connected
"Machines need a store"Settings › Sync › Choose a Store, pick the store, then Assign
The camera won't openAllow camera access in the iPhone's Settings › Field Ready, or add photos from the Library
I deleted something by mistakeDeletions can't be undone. Finalized inspections can never be deleted, so their records are safe

For anything else, open Settings › Help and Support, or email Prime Theory Labs at andrew@primetheorylabs.com. Your store can help with accounts, equipment, and inspections.

↑ Back to the top · Help and Support